- Chimney Rebuild
Complete Chimney Stack Rebuild and Masonry Restoration
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
Carbon monoxide is invisible and has no smell, so a leaking chimney or appliance can go unnoticed. Our certified inspectors test for carbon monoxide and confirm that combustion gases leave your property safely, then hand you a clear written report you can act on.
OVERVIEW
Carbon monoxide forms whenever fuel burns. Under normal conditions the chimney carries it safely up and out, but a small venting fault can release it into occupied space without any warning. A carbon monoxide chimney test measures the gas where your appliances vent and confirms that the chimney is drawing those gases out of the home or building the way it should.
This is one of the most important safety checks for any property that runs a furnace, boiler, water heater, stove, or fireplace. Because carbon monoxide is colorless, odorless, and tasteless, the reading itself is often the first hard evidence that something is wrong.
Our inspectors pair the reading with a full look at the flue, the liner, and the appliance connections. We do not simply confirm a number. We identify what is behind any problem we find, explain it in plain terms, and document everything so you know exactly where the property stands.
WHAT WE CHECK
We measure carbon monoxide at each fuel burning appliance the chimney serves while it operates, so any elevated level is caught at its source.
We check how cleanly each furnace, boiler, water heater, stove, or fireplace is burning fuel, since poor combustion is a common origin of elevated readings.
We examine the flue and liner for cracks, gaps, and wear that let gases slip out of the intended path. A camera is used where the interior is hard to reach.
We look for creosote, nests, and debris that narrow the flue and hold gases back instead of letting them rise and clear.
We confirm the draft is strong enough to pull combustion gases up the chimney and out, rather than letting them stall or reverse into the property.
We inspect the connectors and joints between each appliance and the chimney, where a loose or corroded fitting can leak gas into living or working space.
OUR PROCESS
We confirm which appliances the chimney serves and note the age and type of each system before we begin.
We measure carbon monoxide at each fuel burning appliance while it runs and record how cleanly each unit is burning.
We examine the flue and liner, using a camera where the interior is hard to reach, so hidden cracks and blockages are captured rather than missed.
We verify that gases are drawing up the chimney and leaving the property, and we trace the source of any fault we find.
We document the findings, walk you through them in person, and explain the condition of the system in plain terms.
COMPLIANCE
INSPECTED
Every appliance and area checked is listed, so the record shows exactly what was covered.
TESTED
The carbon monoxide readings taken at each appliance are documented alongside the venting result.
DOCUMENTED
You get a written report with photos or camera footage where relevant, plus a certificate of cleanliness and functionality where the property passes.
WHY US
Trained technicians who test to recognized safety standards, including NFPA 211.
We report what we actually measure and find, with no invented problems and no pressure.
We scan the flue interior where needed, so hidden defects are documented rather than guessed at.
Written documentation, photos, and a plain condition assessment you can keep on file and act on.
Same day appointments, with priority response for a suspected leak or a boiler shutdown.
Fully licensed and insured for both residential and commercial work.
WHO WE SERVE
We carry out carbon monoxide testing across a wide range of properties, from a single fireplace to a multi unit boiler system. Whether you own a home or manage a building, the safety goal is the same: confirm that combustion gases are leaving the structure and not entering it.
Serving Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island.
OUR WORK
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
A new masonry fireplace built to the project plans, with a custom firebrick firebox, smoke chamber and an offset connection into a Class A insulated chimney.
A decommissioned fireplace in a historic brownstone brought back to life with a new firebrick firebox, rebuilt masonry and a reinstalled stainless steel liner.
REVIEWS
FAQ
Once a year is the standard for any property with fuel burning appliances. You should also test before or after a real estate sale, after a chimney fire, after a liner replacement, and after a change of fuel or heating system.
No. An alarm is a last line of defense that reacts once gas is already present. This test finds the venting fault that would let carbon monoxide build up in the first place. You should have both.
Every fuel burning unit the chimney serves, which usually means the furnace, boiler, water heater, stove, and fireplace.
We tell you exactly what is behind it and put it in writing with a plain condition assessment, then our draft correction or repair service handles the fix.
Yes. We test multi unit and commercial boiler flues and can schedule across a portfolio, with documentation suited to code compliance.
Yes. We offer same day appointments and 24/7 priority response for a suspected carbon monoxide leak or a boiler shutdown.
Pricing depends on the number of appliances and the size of the system, so we provide a free estimate up front before any work is scheduled.
Book a carbon monoxide test with our certified inspectors and get a clear written report you can act on.