- Chimney Rebuild
Complete Chimney Stack Rebuild and Masonry Restoration
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
A complete safety review of your chimney and its connected appliance, from obstruction and creosote to structure, clearances, connections, and carbon monoxide risk, delivered as a clear written report you can act on.
OVERVIEW
A chimney safety inspection confirms that your chimney and the appliance it serves can run without a fire or carbon monoxide hazard. Our certified inspectors examine the interior, the exterior, and every connection point, then document the exact condition of the system so nothing is left to guesswork.
People book a fireplace safety inspection for different reasons: after a season of use, before buying or selling, or when they notice smoke, odor, or poor draft. The service reads the same either way. We check the full system, note what we find, and tell you plainly whether it is safe to use.
Where a finding calls for a fix, we note it and point you to the right service, so the report stays an honest record of condition rather than a sales pitch.
SAFETY SCOPE
We check the flue and passage for blockages, nests, debris, and creosote that can fuel a chimney fire or restrict venting.
We assess the masonry, crown, and flue liner for cracks, spalling, and deterioration that let heat or moisture reach places they should not.
We confirm the chimney and appliance sit at safe distances from surrounding combustible materials.
We inspect the joints between the appliance, the flue pipe, and the chimney to confirm they are sealed and secure.
We look for liner cracks, leaks, and draft faults that could let combustion gases enter the home or building.
We verify that the system draws properly and carries combustion byproducts fully to the outside.
OUR PROCESS
We book a same day or next available visit and arrive on time, fully equipped for the inspection.
We examine the stack, crown, cap, and masonry from the outside to spot damage and points of water entry.
We inspect the firebox, the connection points, and the connected appliance for wear, leaks, and clearance issues.
We assess the flue and liner for obstruction, creosote, and cracks, using a video scan where the passage calls for a closer look.
We walk you through what we found in person and hand over a written report with clear conclusions.
COMPLIANCE
INSPECTED
Every accessible component of the chimney and appliance is examined against current code and safety standards.
TESTED
We verify that the system draws and vents correctly before it is cleared for use.
DOCUMENTED
You receive a written report of the condition, with a certificate of cleanliness and functionality where applicable.
WHY US
Trained, experienced technicians who know what to look for in every type of chimney.
We report what we actually find, with no pressure and no invented problems.
Documentation written so you can understand it and put it to use right away.
Same day appointments and prompt response across the city and Long Island.
Full coverage that protects your property throughout the visit.
If we find a fault, our repair and draft correction services can correct it, so nothing falls between vendors.
WHO WE SERVE
We inspect chimneys and venting systems for homeowners and property managers across a wide range of homes and buildings, from single fireplaces to large building systems. Whatever the property, the standard holds: a thorough safety check and a clear written conclusion you can rely on.
Serving Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island.
OUR WORK
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
A new masonry fireplace built to the project plans, with a custom firebrick firebox, smoke chamber and an offset connection into a Class A insulated chimney.
A decommissioned fireplace in a historic brownstone brought back to life with a new firebrick firebox, rebuilt masonry and a reinstalled stainless steel liner.
REVIEWS
FAQ
It is a full review of the condition and safe operation of your chimney and its connected appliance, covering obstruction, creosote, structure, clearances, connections, and carbon monoxide risk, followed by a written report.
A cleaning removes buildup. A safety inspection evaluates the whole system for hazards and documents its condition, whether or not any cleaning is due.
We recommend an annual inspection, plus a check before or after a property sale, after a chimney fire or major storm, and after any change to the fuel type or appliance.
Yes. When the flue calls for a closer look, we use a video scan to capture the interior condition in real time so nothing is missed.
A written report of what was checked and found, photos or video where relevant, prioritized conclusions, and a certificate of cleanliness and functionality where applicable.
Pricing depends on the property and the number of flues, so we provide a free estimate before any work. Call us and we will explain what your inspection involves.
We document it clearly and explain the conclusion. If a fix is needed, we can schedule the correct repair service so one team handles the full path from inspection to resolution.
We offer same day appointments and prompt response across all boroughs and Long Island.
Get certified inspectors, honest findings, and a clear written report for your property. Same day appointments are available across New York City and Long Island.