Or Call Now: 646-401-3121 - Chimney Rebuild
Complete Chimney Stack Rebuild and Masonry Restoration
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
Chimney Code Compliance Inspection in NYC and Long Island
When you need to pull a permit, close a job with a sign off, or clear a violation, a certified code compliance inspection verifies that the chimney and its venting meet current local and NYC code, and gives you the written documentation the building department or filing requires.
-
Certified and Licensed
-
Lifetime Warranty
-
Free Estimates
-
Emergency Service 24/7
OVERVIEW
A Documented Check Against Current Code
A code compliance inspection confirms that the chimney and its venting on your property meet the standards that apply today, including NYC building and fire codes and the NFPA 211 standard. Our certified inspectors review the full system, record the condition of each component, and state clearly whether it passes or where it falls short.
This inspection is written for the moment you have a filing to satisfy. Whether you are pulling a permit, closing out work with a sign off, clearing a chimney violation, or documenting a change to the heating or venting system, the outcome is the same: a report that describes the condition of the chimney in plain terms and a certificate you can hand to a third party.
It reads the same way for a homeowner preparing a pre sale filing and for a property manager clearing a violation across a portfolio. In both cases the goal is documentation an inspector, a building department, or an insurer will accept.
SCOPE OF THE CHECK
What the Inspection Verifies
-
Code and standard
We measure the chimney and venting against current local and NYC building and fire codes and the NFPA 211 standard, and note every point where the system meets or misses the requirement.
-
Structure and masonry
We check the chimney at the roof and along its run, including the masonry, crown, cap, and the point where the system passes through the building or home.
-
Flue and liner
Using a digital flue camera, we review the liner and interior for cracks, gaps, and deterioration that would keep the flue from venting safely and to code.
-
Clearances and connections
We confirm clearances to combustible materials and inspect how appliances, boilers, and flue pipes connect into the chimney.
-
Obstructions and buildup
We look for blockages, nesting, debris, and creosote buildup that affect safety and code status, and record what is present.
-
Draft and venting
We assess draft and airflow so the report reflects how the system actually vents, not just how it looks.
OUR PROCESS
How We Carry Out the Inspection
01
Confirm the Requirement
We start by understanding why the inspection is needed, the code or filing it must satisfy, and any deadline you are working toward.
02
Assess the Exterior and Structure
We evaluate the chimney at the roof and along its run, checking masonry, the crown, the cap, and the connection through the building or home.
03
Scan the Interior
We use a digital flue camera, a draft meter, and a leak detector to review the liner, internal cracks, obstructions, and draft, so conditions hidden from a visual check are recorded.
04
Measure Against Code
We compare every finding to current local and NYC code and NFPA 211, and mark clearly what passes and what does not.
05
Document and Deliver
We compile the written report with photos and findings and issue the certificate you can submit to the authorities or attach to your filing.
COMPLIANCE
Paperwork You Can File
INSPECTED
Full System Review
Every accessible component is checked against current local and NYC code and NFPA 211.
TESTED
Flue and Draft Verified
Camera scanning and draft readings confirm the interior condition, so nothing critical is estimated.
DOCUMENTED
Report and Certificate
You receive a written report with photos and a certificate confirming the review and, where applicable, cleanliness and functionality.
WHY US
Reasons Owners and Managers Choose Us
Certified Inspectors
Trained and certified professionals who know local and NYC code and the NFPA 211 standard.
Findings You Can Trust
We report the chimney exactly as we find it, so the documentation reflects the real condition of the system.
Reports That Get Accepted
Documentation written in plain terms that building departments, inspectors, and insurers recognize.
Fast Scheduling
Same day appointments and prompt turnaround when a permit or violation is on a clock.
Full Coverage
We inspect residential and commercial chimneys of every size, matching the depth of the check to the filing.
Licensed and Insured
Fully licensed and insured for work across the five boroughs and Long Island.
WHO WE SERVE
Owners, Managers, and Buyers on a Deadline
We perform code compliance inspections for the people who carry the paperwork: homeowners preparing a pre sale or permit filing, property managers clearing violations and closing out work across their buildings, and buyers who need the chimney documented before a transfer. In every case we match the depth of the inspection to the property and the filing it supports, and we report to whoever has to sign off.
- Single family homes
- Townhouses and condos
- Brownstones
- Historic homes
- Multi family buildings
- Commercial and office buildings
- Restaurants and kitchens
- Hotels and hospitality
Schedule an Inspection
Serving Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island.
OUR WORK
Recent Code Compliance Inspections
- Fireplace and Firebox
Custom Fireplace Construction with Class A Chimney and Offset Flue
A new masonry fireplace built to the project plans, with a custom firebrick firebox, smoke chamber and an offset connection into a Class A insulated chimney.
- Fireplace and Firebox
Brownstone Fireplace Reconstruction and Restoration
A decommissioned fireplace in a historic brownstone brought back to life with a new firebrick firebox, rebuilt masonry and a reinstalled stainless steel liner.
REVIEWS
What Our Clients Say
Mike S.
Chimney Professionals did a terrific job cleaning my two wood burning fireplaces in a Manhattan brownstone. They came within one day. Their equipment is state of the art, and it was all done in less than 30 minutes. Everything kept spotless. The price was right too.
1 Mar 2026
M. J.
Not only did they answer right away, they had Rod at my door first thing Monday morning and sourced a hard to find part same day when others could not. They beat every other quote I got and had our system back up and running in under an hour.
27 Oct 2025
Bruce S.
The chimney in my 115 year old brick rowhouse had a badly deteriorated terra cotta lining. Michael gave me a fair price, was punctual, and while spending more time than he expected, stuck to the original price. Kudos to Michael for getting a tricky job done.
2 Nov 2025
Jim S.
Mike and his team are phenomenal. Very quick to respond and schedule and then more importantly, absolute professionals. Deep cleaned the chimney and made sure they cleaned any residual dust around the area.
13 Nov 2025
Ryan L.
Our building needed three new liners for each apartment. They did a great job with the removal and new installation. Mike was very easy to work with, and very responsive with any follow ups.
10 Aug 2025
Donna L.
Chimney Professionals were prompt, professional and neat. We would recommend them to anyone looking to get their fireplaces cleaned. A pleasure to work with.
3 Dec 2025
Alan H.
We asked them to inspect our roof and chimney before an upcoming home inspection. They explained every detail clearly, helped us understand what needed fixing, and even assisted with budgeting.
10 Dec 2025
Baktiar M.
Same day service, quick and efficient. Used drones to check the chimney and provided a report. Definitely recommend.
25 Feb 2025
Kara T.
They were able to come out next day and fix our gas fireplace issue. They listened to all of our concerns and addressed any questions we had while thoroughly explaining the work that needed to be done. The price was fair and upfront.
15 Nov 2024
Brandon G.
Mike set up an appointment for the next day to clean our dryer vent. He maintained good communication the whole time. The technician who arrived was professional and did a thorough job. The price was reasonable too.
23 Aug 2025
FAQ
Code Compliance Inspection Questions
Common triggers include applying for a permit, closing out work with a sign off, clearing a violation, selling or transferring a property, or documenting a change to the heating or venting system.
We measure the chimney and venting against current local and NYC building and fire codes and the NFPA 211 standard.
You receive a formal written report with photos, findings, and a certificate confirming the review and, where applicable, cleanliness and functionality.
Yes. We use a digital flue camera, a draft meter, and a leak detector so the interior condition of the flue is documented, not estimated.
The report states exactly what falls short of code. Corrections are handled by our repair services, and the item can be reinspected and documented once the work is complete.
Cost depends on the property, the number of flues, and the filing the inspection supports. We provide a free estimate before we schedule so the price is clear up front.
We offer same day appointments and can prioritize inspections tied to a permit deadline or an open violation.
Get Your Chimney Inspected and Documented
Schedule a certified code compliance inspection in New York City and Long Island, and receive the report and certificate you need to move your permit, sign off, or violation forward.