- Chimney Rebuild
Complete Chimney Stack Rebuild and Masonry Restoration
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
When a serious hazard is suspected in a part of the chimney that cannot be seen from the outside, a Level III inspection opens the concealed areas to confirm the cause. Our certified inspectors deliver honest findings and clear documentation you can act on.
OVERVIEW
A Level III investigative chimney inspection is the most thorough evaluation we perform. It is called for when a hazard is suspected in a part of the chimney or the surrounding structure that a standard visual or video inspection cannot reach.
To confirm the condition with certainty, we access concealed portions of the chimney or the adjoining building. Reaching those areas can require the careful removal or opening of specific components, so this level is reserved for serious cases rather than routine checks.
Every finding is recorded in a written report, so you know exactly what was examined, what was found, and what the home or building needs next.
SCOPE
This inspection includes the readily accessible visual checks and the internal video scanning of the flue, then goes further into areas the lower levels cannot see.
Internal camera scanning documents cracks, blockages, creosote buildup, and deterioration along the length of the flue.
We examine sections of the chimney hidden behind walls, enclosures, or the surrounding building where a problem is suspected.
Where the evidence points to a concealed area, we open or remove the specific components needed to reach it and confirm the cause.
We check boiler and appliance connections and how the venting system draws and performs as a whole.
We determine whether a suspected fire, water, or structural hazard is present, identify its source, and record its extent.
OUR PROCESS
We discuss the concern, review any prior inspection reports or incident history, and define exactly what needs to be investigated.
We complete the Level I and Level II work first, including internal camera scanning of the flue, to gather all evidence available without opening any components.
Where the evidence points to a concealed area, we carefully open or remove the specific components needed to reach it, limiting access to what the investigation requires.
We inspect the concealed portions in person, capture photos and video, and record the condition along with any code or safety findings.
We return any opened components to their original condition and deliver a written report with our findings and the conclusion for the property.
COMPLIANCE
INSPECTED
Every accessible and concealed area within the defined scope is checked against current NYC codes and safety standards.
TESTED
The flue, connections, and venting are evaluated so the conclusion reflects how the system actually performs.
DOCUMENTED
Findings are captured in writing with photos and video, giving you a record you can act on and share.
WHY US
Trained, credentialed professionals who know NYC requirements and standards.
We report what we find plainly, with no pressure and no upselling.
Internal scanning documents the flue so conclusions are shown, not just described.
Documentation that reads easily and holds up for insurance, sales, and repair planning.
Prompt appointments and rapid response for urgent post incident cases.
Fully licensed and fully insured for work on both homes and commercial properties.
WHO WE SERVE
A Level III investigative inspection applies wherever a chimney or venting system needs a definitive answer, from a single home to a large building portfolio. We work with homeowners as well as building and property managers who need the source of a serious problem located and documented with certainty, whether it follows a fire, storm damage, or a hidden hazard flagged by an earlier inspection.
Serving Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island.
OUR WORK
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
A new masonry fireplace built to the project plans, with a custom firebrick firebox, smoke chamber and an offset connection into a Class A insulated chimney.
A decommissioned fireplace in a historic brownstone brought back to life with a new firebrick firebox, rebuilt masonry and a reinstalled stainless steel liner.
REVIEWS
FAQ
It is the most thorough level of chimney inspection. It includes everything in a Level I and Level II inspection plus examination of concealed portions of the chimney or building, which can require opening or removing certain components to confirm a suspected hazard.
A Level III is warranted after a chimney or building fire, following weather or structural damage, when a Level I or Level II inspection reveals a hidden hazard, before major repairs, or when a problem is suspected but cannot be seen.
Only where it is necessary to reach a concealed area and confirm the cause. We limit access to the specific components involved and return them to their original condition once the examination is complete.
Yes. We use internal camera scanning of the flue with lighting and zoom to document creosote, cracks, blockages, and deterioration, which often reduces how much needs to be opened.
A written report describing what was checked and found, photos and video where relevant, code and safety findings, and, where applicable, a certificate of cleanliness and functionality.
Your report documents the finding and the conclusion, and our repair and draft correction services handle whatever correction it calls for.
Because the scope depends on what needs to be accessed, pricing is confirmed after we review the concern. We provide a free estimate before any work begins.
If a serious problem is suspected, our certified inspectors will locate the cause and document it clearly. Schedule your Level III investigative inspection today.