- Chimney Rebuild
Complete Chimney Stack Rebuild and Masonry Restoration
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
If you are converting an appliance to gas and need to prove the flue is sealed, or you suspect smoke and combustion gases are escaping through a hidden crack, a chimney smoke test gives you the answer. Our certified inspectors send controlled smoke through the flue, watch for the exact point where it escapes, and document whether the chimney is tight or leaking.
OVERVIEW
A chimney smoke test answers one question with certainty: is the flue holding smoke and combustion gases where they belong, or is some of it escaping into the property. Many breaches stay hidden behind masonry, inside chase walls, or along a liner where a camera and a flashlight cannot see them. Controlled smoke brings those faults into plain view.
This flue leak test suits both homeowners and building or property managers. It is the standard way to prove a flue is sealed before an appliance is converted to gas, to confirm the cause when smoke or an odor is reaching living space, and to verify flue integrity after work on a boiler or heating appliance.
The test is about tightness, not performance. It shows whether the passage leaks and where, so you know the true condition of the chimney before you rely on it.
WHAT WE CHECK
Controlled smoke escaping through the liner marks the exact spot where a crack or gap is letting gases into the property.
The test exposes open mortar joints, voids, and separations in the surrounding masonry that a visual check can miss.
We watch the points where sections and appliance connections meet, since these seams are common places for smoke to seep out.
Where smoke shows through a wall, ceiling, or chase, it confirms a breach hidden from direct view.
Smoke passing from one flue into an adjacent flue reveals a breach in the dividing wall of a shared chimney.
When the flue holds the smoke with no escape, the test confirms the passage is sealed and ready to be relied on.
OUR PROCESS
We confirm the reason for the test, examine the chimney and its venting, and prepare the flue so smoke can be introduced safely.
We block off the relevant flue openings so the smoke stays contained and any escape point becomes obvious.
We fill the flue with dense, controlled smoke, sometimes under slight pressure, and observe the full run of the chimney inside and out.
We track exactly where smoke escapes and note every crack, gap, or breach it reveals, capturing photos or video where relevant.
We walk you through what the test showed and deliver the written report with the location of any leak clearly recorded.
COMPLIANCE
INSPECTED
The chimney and its venting are examined before and during the test.
TESTED
Controlled smoke shows whether the flue holds or where it leaks.
DOCUMENTED
You receive a written report with photos or video where relevant.
WHY US
Trained professionals run and document every smoke test.
We pinpoint the escape point, not just a general area.
We report what the test shows, with no pressure and no upsell.
Written documentation you can understand, keep, and submit.
Same day appointments across the service area when you need a quick answer.
Fully covered for work on residential and commercial properties.
WHO WE SERVE
A flue can leak in any kind of building, and the reason for testing it shifts with the reader. Homeowners often want proof that a flue is tight before converting to gas or before trusting a chimney with smoke reaching a room. Building and property managers need the same proof across their portfolios, whether they are clearing a chimney for use, responding to a reported odor, or confirming integrity after boiler work.
Serving Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island.
OUR WORK
A severely deteriorated rooftop chimney stack was dismantled to a sound base and rebuilt in new red brick, with a new crown and a stainless steel cap.
A new masonry fireplace built to the project plans, with a custom firebrick firebox, smoke chamber and an offset connection into a Class A insulated chimney.
A decommissioned fireplace in a historic brownstone brought back to life with a new firebrick firebox, rebuilt masonry and a reinstalled stainless steel liner.
REVIEWS
FAQ
It is an inspection where controlled smoke is sent through the flue so we can see exactly where it escapes. Any smoke seeping out reveals a crack, gap, or breach that lets combustion gases into the property.
Converting an appliance to gas depends on a flue that is fully sealed. The test proves the passage holds smoke with no escape, which is the evidence that the flue is ready.
A camera scan shows the physical condition inside the flue, while a smoke test proves whether the flue actually holds smoke and gases. The two work well together, and we can advise which fits your situation.
Yes. Breaches behind masonry, inside a chase, or along a hidden section often do not show on camera but reveal themselves the moment smoke escapes through them.
We record the exact location in your report, and our repair service seals it once you approve the work.
Yes. You receive a written report of what was checked and found, along with photos or video where relevant.
The price depends on the property, the number of flues, and access. We provide a free estimate before any work, so you know the cost in advance.
We offer same day appointments across Brooklyn, Manhattan, the Bronx, Queens, Staten Island, and Long Island whenever scheduling allows.
Schedule a chimney smoke test with our certified inspectors and get honest findings with clear documentation for your home or building.